Structural characteristics
The horizontal feed mixer has the advantages of compact structure and good sealing. Its feed port is provided with a baffle to prevent the material from backing up. The blade of horizontal feed mixer is fan-shaped, and the contact area with the medium is large and the mixing is uniform. The mixer has a low residual material rate, and the bottom of the box is provided with a dividing ridge, to ensure that there is no dead Angle in the equipment, there will be no residue and waste.
Design purpose
The horizontal feed mixer is mainly used for mixing and conveying powder materials. It can be used for solid-solid (powder and powder) mixing and solid-liquid (powder and liquid) mixing and drying operation. The dry humidity can be adjusted by manual control valve to meet the proper conveying requirements. In addition, horizontal feed mixers can also be used as reaction equipment, and can be adapted to humidification, mixing and conveying of other granular materials, and can be specially designed and customized according to customer requirements.
Operating principle
The operation principle of the horizontal feed mixer is as follows: the material in the mixer is in a state of weightlessness under the mechanical action, resulting in the phenomenon of convection and diffusion, so as to achieve uniform mixing. This mixer has a very wide range of application. During mixing operation, even materials with large differences in physical properties (such as weight and particle size) will not precipitate, which overcomes the shortcomings of some feed mixers and achieves higher mixing accuracy.
Environmental protection low energy
The horizontal feed mixer has low energy consumption, only 1/4 of the general mixer. Under normal circumstances, the mixing time of materials only takes about 1 minute. In addition, the equipment can be closed operation, provide manual, electric and pneumatic discharge forms, and has reliable operation, easy maintenance, fast mixing speed.
Usually, when using horizontal feed mixer, the operator should regularly maintain the equipment. The following Xiaobian will introduce the fault check steps of horizontal feed mixer for you:
Fault check procedure for horizontal feed mixer
1. Check whether the power supply and motor wiring are normal.
2. Check whether the bolts are tight and the lubrication is good.
3. Check the tension of the transmission belt. You can press the belt moderately with your fingers, with a relaxation of 20-30 mm as the standard.
4. Rotate the main shaft pulley to see if it is flexible and stable. If the rotating parts are flexible, they can start to run normally.
5. Check whether the rotation direction of the feed mixer is correct during the startup test. If the rotation direction is wrong, just change the connection position of the wire in the power wiring of the motor.
With the help of horizontal feed mixers, farmers can save a lot of time and effort, and make livestock production easier and more efficient.