For the feed mixer, in order to keep the whole system in normal production state, it is generally necessary to carry out effective maintenance, and the specific operation will be directly reflected in the daily production, do you believe? Look at that! The body structure includes: lead hopper, lead screw shaft, cylinder and other parts, when the material is mixed, through the screw to stir the tumbling material. When the feed machine works normally, there are still many problems, which need the staff to pay more attention to.
Before starting the machine, make short running testing machine to check whether there is abnormal connection of each component, whether the electrical operation can reach normal state, and whether the bearing lubrication work is in place. After turning on the power, start the testing machine. The air transport testing machine is operated by the feed mixer without feeding, to ensure that the whole machine does not appear in the process of high bearing heat, abnormal operation, high temperature of the reducer. After confirmation, it can be formally put into use.
When starting, put the operating handle of the stirring cylinder in the stop position.
After starting, run the mixing cylinder at a low speed for 10 minutes, heat the hydraulic oil to more than 20℃, and then enter the formal working process.
If the feed mixer needs to be stored in the open environment, before starting to load, turn the mixing drum upside down to remove water and debris inside to ensure higher quality of materials.
When transporting materials, place the slide in a firm position to avoid shaking caused by loosening.
After shipment, the mixing tank should rotate at 2 RPM to 10 RPM.
During the entire operation, all internal air is expelled when the powder or aggregate is put into the metering container or mixing cylinder. In the whole exhaust process, small dust will be raised, will not only make the working environment in a bad stage, but also directly damage the feed mixer, affect the service life of the machinery.
Cattle Tmr Feed Mixder from HINDA
If you need a New TMR Feed Mixer, contact the experts at HINDA International today. Our machines are designed to be used for large, medium, and small cattle farms，got farms. Contact Us by email for more information about our Products and how they can help your operations